Cairns automatic Doors have many years experience in all aspects of sliding door operation, service, repair and maintenance within the Cairns and surrounding regions of all the makes and models available.
We will happily assess and recommend whatever is required to suit any customer’s requests regarding all enquiries to do with automation of sliding doors.
Please note that as we are a totally neutral door company and NOT attached to any of the auto door manufacturers, we can give sound advice regarding your specific requirements, especially the manufacturers that will try to lock you into their own brand by having equipment and software that is only available to their own technicians and service agents, this will allow them to charge the customer premium prices for any future adjustments.
We take pride in only recommending equipment that can be repaired and adjusted by anybody with minimal technical knowledge.
Various other aspects taken into consideration are, for example,
1. How busy the entry is on a daily basis.
2. Size and weight of the door panel or panels.
3. Location of the entry (is it on a busy pavement).
4. The budget available and what a customer can expect.
5. Any safety requirements to be considered.
Below are a few examples of what can be achieved:-
Repairs and retro fit upgrades to all types of automatic door operators, a retro fit upgrade is a very economical repair which involves replacing the internal motor drive and control components only, this will not only make the door operate like new, but will also bring old operators up to the latest safety standard, the existing housing, pelmet door panels and general look etc remain unchanged.
Routine scheduled maintenance to comply with AS5007 which is recommended to be carried out at least every four months. After each service, a detailed report will be submitted outlining the overall condition of the door operator, particular attention will be given to all the required safety features incorporated and advice given for improvements that can be made to increase the safety level.
Security features checked including mechanical locking and electric locking.
Back up reserve batteries & charge system testing, in case of power outage the reserve batteries are crucial for both security and emergency escape route operation.
Emergency exit controls, mounting location and function, especially if the doorway is an emergency fire exit point.
All function controls and sensor operation set up correctly and door operating speeds tuned.
Remote control supplied and fitted, this enables staff to, for example, remotely lock, unlock or pulse the auto doors to enable only selected people in or out after hours.
Floor guide systems checked, this is often either a week point regarding security or some types are causing major abrasion damage to the door panels as the incorrect version was originally installed.
Keep the cool air in and the tropical heat out, by letting us convert your existing manual sliding door or doors into automatic motion sensor operated doors.
Jason Fenech and Trevor Scott
Contact us today for an obligation free quote.
Mobile: 0477 005 008
Electrical Contractors Licence Number 80352.
Over 25 years experience in all aspects of the automatic door industry within Cairns and the surrounding regions.
Routine maintenance compliant to AS5007.